Sanwa DCM2000DR Digital Clamp Meter

₱31,218.00

Function	Measuring range	Best accuracy	Resolution
ACA	200.0/2000A	±(2.0%+5)	0.1A
DCA	200.0/2000A	±(2.0%+5)	0.1A
ACV	6.000/60.00/600.0/1000V	±(1.2%+5)	0.001V
DCV	6.000/60.00/600.0/1000V	±(0.5%+5)	0.001V
Resistance	600.0/6.000k/60.00k/600.0k/6.000M/40.00MΩ	±(0.5%+5)	0.1Ω
Frequency	10～1999Hz	±(0.1%+4)	0.01Hz
Capacitance	60n/600n/6μ/60μ/600μ/2000μF	±(2.0%+5)	0.01nF
Continuity	Buzzer sounds at below 10-200Ω Open voltage: approx. 0.5V
Diode test	Open voltage: approx. 1.8V
EF sensing	A voltage or electric field of about 60 V or more is detected. The bar graph and intermittent buzzer beeps change in three steps according to the field intensity. (50/60Hz)

Sampling rate	Approx. 5 times/sec.
Bandwidth	50～400Hz
Display	6000/1999（Hz)
Max. overload protection input	DC/AC1100V CT: DC/AC2000A
Clamp diameter/Conductor size	Φ55mm/20x66mm
Battery	R6Px2
Battery life	A function: Approx. 80 hrs. Functions other than A: Approx. 240 hrs. (Zinc-carbon battery/Backlight off)
Size/Mass	H264×W97×D43mm/Approx. 640g
Safety standards	IEC61010 CAT.Ⅳ1000V

Description

DC/AC current measurable max. 2000A, CAT.IV 1000V
Dual display shows voltage/current and its frequency
EF (Electric Field) detection
VFD (Variable Frequency Drive) frequency measurement
Low input impedance voltage measurement capable of attenuating the effects of ghost voltages
Peak hold (Interval: 5 ms)
Auto power save (30 min./Cancelable)

There are no reviews yet.

Be the first to review “Sanwa DCM2000DR Digital Clamp Meter”